AR# 32095

10.1 EDK SP3, XPS_LL_TEMAC_v1_01_b - Why is there no support for Spartan-3 devices?

描述

Why does the XPS_LL_TEMAC_v1_01_b not support Spartan-3 devices?

解决方案

The support was not added because this core was not tested with Spartan-3.The support will be added in the next release.  

 

Meanwhile, you can use this work-around to add support for the Spartan-3 device:

 

1.Make a local copy of the IP, by copying the folder "%XILINX_EDK%\hw\XilinxProcessorIPLib\pcores\xps_ll_temac_v1_01_b" to "\pcores\".

 

2.Modify line 32 of "xps_ll_temac_v1_01_b\data\xps_ll_temac_v2_1_0.mpd" in the local copy as follows:

 

OPTION ARCH_SUPPORT_MAP = (virtex2p=PREFERRED, aspartan3=PREFERRED, spartan3an=PREFERRED, spartan3a=PREFERRED, spartan3e=PREFERRED, spartan3adsp=PREFERRED, virtex4lx=PREFERRED, virtex4sx=PREFERRED, virtex4fx=PREFERRED, virtex5lx=PREFERRED, virtex5sx=PREFERRED, virtex5tx=PREFERRED, virtex5fx=PREFERRED, aspartan3e=PREFERRED, aspartan3a=PREFERRED, aspartan3adsp=PREFERRED, qvirtex4lx=PREFERRED, qvirtex4sx=PREFERRED, qvirtex4fx=PREFERRED, qrvirtex4lx=PREFERRED, qrvirtex4sx=PREFERRED, qrvirtex4fx=PREFERRED)

 

to

 

OPTION ARCH_SUPPORT_MAP = (virtex2p=PREFERRED, aspartan3=PREFERRED, spartan3an=PREFERRED, spartan3a=PREFERRED, spartan3e=PREFERRED, spartan3adsp=PREFERRED, virtex4lx=PREFERRED, virtex4sx=PREFERRED, virtex4fx=PREFERRED, virtex5lx=PREFERRED, virtex5sx=PREFERRED, virtex5tx=PREFERRED, virtex5fx=PREFERRED, aspartan3e=PREFERRED, aspartan3a=PREFERRED, aspartan3adsp=PREFERRED, qvirtex4lx=PREFERRED, qvirtex4sx=PREFERRED, qvirtex4fx=PREFERRED, qrvirtex4lx=PREFERRED, qrvirtex4sx=PREFERRED, qrvirtex4fx=PREFERRED, spartan3=PREFERRED)

 

NOTE: Do not make modifications to the install area.

AR# 32095
日期 06/08/2020
状态 活跃
Type 一般类