UPGRADE YOUR BROWSER

We have detected your current browser version is not the latest one. Xilinx.com uses the latest web technologies to bring you the best online experience possible. Please upgrade to a Xilinx.com supported browser:Chrome, Firefox, Internet Explorer 11, Safari. Thank you!

AR# 32175

LogiCORE FlexRay v1.1 - Reading back the default values of the Sync Frame Status Register (SFSR) does not match UG338

Description

Reading back the default value of the Sync Frame Status Register (SFSR) does not match the value in the FlexRay v1.1 User Guide (UG338)

解决方案

After a reset, reading back the default value of the Sync Frame Status Register (SFSR) does not match that shown in ug338.  

 

The address range for the Sync Frame Status Register (SFSR) in the FlexRay 1.1 User Guide on page 51 is shown as 0x00000340 0x00000378, which is not correct. The correct address range for this register is 0x00000300 0x00000338 as mentioned on page 16 of FlexRay v1.1 data sheet. 

 

This issue will be corrected in the next revision of the FlexRay User Guide (ug338).

AR# 32175
创建日期 02/25/2009
Last Updated 05/23/2014
状态 Archive
Type 综合文章