UPGRADE YOUR BROWSER

We have detected your current browser version is not the latest one. Xilinx.com uses the latest web technologies to bring you the best online experience possible. Please upgrade to a Xilinx.com supported browser:Chrome, Firefox, Internet Explorer 11, Safari. Thank you!

AR# 32294

11.1 EDK - SDK setup script defines $PATH twice

Description

The "settings.sh" and "settings.csh" files have set up the $PATH as follows: 

 

if ($?PATH) then 

setenv PATH /proj/xbuilds/jhunt/L.33.1.1_linux/SDK/bin/lin64:${PATH}:${PATH} 

else 

setenv PATH /proj/xbuilds/jhunt/L.33.1.1_linux/SDK/bin/lin64:${PATH} 

endif 

 

 

If the $PATH variable is not defined, the settings script will not run. If the $PATH is defined, the $PATH variable will be twice as long.

解决方案

The $PATH should be setup in the following manner in the settings scripts: 

 

if ($?PATH) then 

setenv PATH /proj/xbuilds/jhunt/L.33.1.1_linux/SDK/bin/lin64:${PATH} 

else 

setenv PATH /proj/xbuilds/jhunt/L.33.1.1_linux/SDK/bin/lin64 

endif 

 

This problem has been fixed in EDK 11.2, available at: 

http://www.xilinx.com/support/download/index.htm

AR# 32294
创建日期 04/13/2009
Last Updated 05/23/2014
状态 Archive
Type 综合文章