UPGRADE YOUR BROWSER

We have detected your current browser version is not the latest one. Xilinx.com uses the latest web technologies to bring you the best online experience possible. Please upgrade to a Xilinx.com supported browser:Chrome, Firefox, Internet Explorer 11, Safari. Thank you!

AR# 32299

11.1 ChipScope Pro - Inserter "WARNING:sim:356 - The parameter "Exclude_From_Data_Storage_1" is disabled, its value will default from false to true"

Description

When I add cores to my design using the ChipScope Inserter, the following warning occurs: 

 

"WARNING:sim:356 - The parameter "Exclude_From_Data_Storage_"' is disabled, its value will default from false to true."

解决方案

If you enable the data port, then you cannot have the trigger ports also connected to the data storage buffer (AKA trace buffer). When "Data Same As Trigger" is unchecked, the state of the "Include Trig0 Port" is grayed out. If "Include Trig0 Port" is checked, it remains checked even though "Data same as Trigger" is unchecked. This can cause the specified warning, which can be safely ignored.  

 

This issue will be resolved in ChipScope Pro 11.2.

AR# 32299
创建日期 04/07/2009
Last Updated 05/21/2014
状态 Archive
Type 综合文章