UPGRADE YOUR BROWSER

We have detected your current browser version is not the latest one. Xilinx.com uses the latest web technologies to bring you the best online experience possible. Please upgrade to a Xilinx.com supported browser:Chrome, Firefox, Internet Explorer 11, Safari. Thank you!

AR# 32335

11.1 ISE Install - How do I upgrade from WebPACK to a Foundation version of ISE?

Description

I just purchased ISE Foundation and had previously used ISE WebPACK. How can I upgrade from WebPACK to the Foundation version of ISE?

解决方案

In ISE software 11.1, it is now possible to upgrade from a WebPACK installation to Foundation of ISE software without a full reinstall. To do this, you will need a new FlexLM license that is valid for the Foundation version of ISE software 11.1. Additionally, you will need to install the device files for the Foundation/Edition devices if you do not have them already.

To install only the device files, you should launch either the WebInstaller or the a Single File Download that includes ISE Foundation:

-Continue through the installer until you are asked to "Select Destination Directory" and pick the same location where WebPACK is installed.
-Click next. Then, for "Select Products to Install", select "ISE Design Tools".
-Click next. Then, for "Select Installation Options", deselect everything except for "Foundation/Edition Devices".
-In the next two pages you can deselect all of the environment variables and the other installation options, as these will already have been set when you installed WebPACK.
-You will now be able to access all the devices.

AR# 32335
创建日期 04/09/2009
Last Updated 12/15/2012
状态 Active
Type 综合文章
Tools
  • ISE Design Suite - 11.1
  • ISE Design Suite - 11.2
  • ISE Design Suite - 11.3
  • More
  • ISE Design Suite - 11.4
  • ISE Design Suite - 11.5
  • Less