UPGRADE YOUR BROWSER

We have detected your current browser version is not the latest one. Xilinx.com uses the latest web technologies to bring you the best online experience possible. Please upgrade to a Xilinx.com supported browser:Chrome, Firefox, Internet Explorer 11, Safari. Thank you!

AR# 32542

11.1 ISE - In Project Navigator, after switching from XST to Synplify for synthesis, the XST results are still used for implementation

描述

I Implement a design in Project Navigator with XST as the synthesis tool. Then, I change the synthesis tool to Synplify to compare results. When I run the design through, Synplify synthesis completes successfully, but when Project Navigator starts the translate process, NGDBuild uses the ".ngc" file previously generated by XST (rather than the ".edf" file from Synplify).

解决方案


This issue will be fixed in the ISE 11.2 release.



To compare the results in ISE 11.1, the ".ngc" file from XST needs to be temporarily re-named or moved before implementing with Synplify synthesis.
AR# 32542
日期 02/25/2011
状态 Archive
Type 综合文章
的页面