Implementation of Tri-speed GMII interface fails in MAP due to not being able to place a clock pin and BUFG in the same half of the device. When a design with EMAC0 and EMAC1 configured with Tri-speed GMII interface is implemented, it fails in MAP with the following error:
"ERROR:Place:592 - A clock IOB / BUFGCTRL clock component pair have been found that are not placed at an optimal clock IOB / BUFGCTRL site pair."
To avoid this error, add the following constraint in the UCF:
INST "mii_tx_clk_0" LOC = "BANK3";
AR# 32545 | |
---|---|
日期 | 12/15/2012 |
状态 | Active |
Type | 综合文章 |