UPGRADE YOUR BROWSER

We have detected your current browser version is not the latest one. Xilinx.com uses the latest web technologies to bring you the best online experience possible. Please upgrade to a Xilinx.com supported browser:Chrome, Firefox, Internet Explorer 11, Safari. Thank you!

AR# 32618

SPI-4.2 v9.1 - NCSim timing simulation does not work with SDF file

Description

NCSim timing simulation does not work correctly with an SDF file. There are data mismatches caused by data going to an unknown "X" state.

解决方案

To work around this issue, run the simulation without bringing in an SDF file. This issue is scheduled to be fixed in ISE software 12.1.

 

Revision History 
05/04/2009 - Initial Release
04/07/2010 - Added fixed version

AR# 32618
创建日期 05/04/2009
Last Updated 05/21/2014
状态 Archive
Type 综合文章