AR# 32637

描述

This README Answer Record contains installation instructions for EDK 11.5. A successful installation of EDK 11.5 Update changes your software version number to 11.5. 

The destination directory specified during the setup operation must contain an existing Xilinx ISE installation. Any new device support not previously installed should first be installed before adding the Update. 

NOTE: EDK 11.5 requires ISE 11.5.

解决方案

Installation Instructions for Windows Users: 

1. Download "Xilinx_11.5_ISE_DS_nt.tar" from https://www.xilinx.com/support/download/index.html/content/xilinx/en/downloadNav/design-tools/archive.html
2. Untar the archive. For more information about tar files see (Xilinx Answer 32818).
3. Open the untarred archive and run "xsetup.exe" by double-clicking on it. 
4. Select the root location of ISE Design Suite as your destination directory (i.e., C:\Xilinx\11.1). 

Installation Instructions for Linux Users: 

1. Download "Xilinx_11.5_ISE_DS_lin(64).tar" from https://www.xilinx.com/support/download/index.html/content/xilinx/en/downloadNav/design-tools/archive.html
2. Untar the archive. For more information about tar files see (Xilinx Answer 32818).
3. Open the untarred archive and run "xsetup" by typing ./xsetup to a terminal.
4. Select the root location of ISE Design Suite as your destination directory. 

Note: Web XilinxUpdate can also be used to download and install ISE Updates by typing xilinxupdate into a terminal/command prompt or through ISE -> Help -> XilinxUpdate. 

For more information on what other products are included in this update, please see (Xilinx Answer 33216).