We have detected your current browser version is not the latest one. Xilinx.com uses the latest web technologies to bring you the best online experience possible. Please upgrade to a Xilinx.com supported browser:Chrome, Firefox, Internet Explorer 11, Safari. Thank you!

AR# 32693

LogiCORE Reed Solomon Decoder v6.1 - Why does the DOUT port stop, even with a full license installed after several hours of running in hardware?


Originally, the core was tested using the evaluation license on hardware and the DOUT stopped after several hours as expected. The core was purchased and the full license installed.  


In ISE, the "regenerate core" option was used to regenerate the netlist. However, the DOUT still stopped after several hours.


To resolve this issue, it is necessary to delete the old XCO and start again from the beginning to recreate the netlist.

AR# 32693
日期 05/23/2014
状态 Archive
Type 综合文章