UPGRADE YOUR BROWSER

We have detected your current browser version is not the latest one. Xilinx.com uses the latest web technologies to bring you the best online experience possible. Please upgrade to a Xilinx.com supported browser:Chrome, Firefox, Internet Explorer 11, Safari. Thank you!

AR# 32714

11.1 Partitions - Is it possible to include an EDIF or NGC netlist as a partition?

Description

Is it possible to use an EDIF or NGC netlist as a submodule partition within a Project Navigator design?

解决方案

It is possible to use an EDIF or NGC netlist as a submodule partition within a Project Navigator design. However, Project Navigator will not keep track of whether or not these submodule netlists are up-to-date. If you alter the netlist, you must explicitly set that partition out-of-date for the changes in the netlist to be updated during the next implementation run. If you do not do this, the netlist partition will be preserved as if there were no changes made.

AR# 32714
创建日期 06/05/2009
Last Updated 05/23/2014
状态 Archive
Type 综合文章