UPGRADE YOUR BROWSER

We have detected your current browser version is not the latest one. Xilinx.com uses the latest web technologies to bring you the best online experience possible. Please upgrade to a Xilinx.com supported browser:Chrome, Firefox, Internet Explorer 11, Safari. Thank you!

AR# 32827

11.2 iMPACT - Virtex-6 FPGA Indirect BPI Programming support

Description

When will Virtex-6 FPGA Indirect BPI Programming be supported? Is it supported in SVF mode?

解决方案

iMPACT Indirect BPI Programming

Indirect BPI Programming for Virtex-6 devices is supported in ISE tools 11.2. for 1.1 and 2.0 Silicon. iMPACT JTAG programming of the FPGA is also supported for ES0 and requires the CONFIG STEPPING in UCF to produce a ".bit" file for correct target silicon.

SVF Indirect BPI Programming

Indirect BPI programming is not supported in iMPACT 11.2. Attempting to create an SVF in ISE tools 11.2 results in the following message in the console:

"INFO:iMPACT - '3781' : Boundary Scan File is not supported for BPI Device."

SVF mode indirect programming is added in iMPACT 11.3.
AR# 32827
创建日期 06/04/2009
Last Updated 08/04/2010
状态 Archive
Type 综合文章
器件
  • Virtex-6 CXT
  • Virtex-6 HXT
  • Virtex-6 LX
  • More
  • Virtex-6 LXT
  • Virtex-6 SXT
  • Less