UPGRADE YOUR BROWSER

We have detected your current browser version is not the latest one. Xilinx.com uses the latest web technologies to bring you the best online experience possible. Please upgrade to a Xilinx.com supported browser:Chrome, Firefox, Internet Explorer 11, Safari. Thank you!

AR# 32920

SPI-4.2 Lite v5.1 - Virtex-6 design might fail timing in PAR

描述

In some cases, the following timing constraint might fail in PAR:   
TS_RDClk_P = PERIOD TIMEGRP "RDClk_P" 225 MHz HIGH 50% INPUT_JITTER 0.2 ns

解决方案

To work around this issue, make the following changes in the UCF file: 

1. Comment out the following constraint: 

 # NET "<snk_core_instant_name>/U0/pl4_lite_snk_reset0/rdclk0_rst_gen/reset_out_i*" MAXDELAY = 2.38 ns; 

2. Add the following constraints in the UCF file: 

INST "<snk_core_instant_name>/U0/pl4_lite_snk_reset0/rdclk0_rst_gen/reset_out*" TNM = snk_rdclk_reset; 
INST "<snk_core_instant_name>/U0/pl4_lite_snk_io0/virtex*/*IDDR" TNM = snk_iddr; 
TIMESPEC "TS_Snk_reset_iddr" = FROM "snk_rdclk_reset" TO "snk_iddr" "TS_RDClk_P"/ 4 DATAPATHONLY; 
TIMESPEC "TS_Snk_reset_ffs" = FROM "snk_rdclk_reset" TO "FFS" "TS_RDClk_P"; 

Essentially, the commented MAXELAY contraint is replaced with two constraints: the non-critical reset timing path (TS_Snk_reset_iddr) and the critical reset timing path (TS_Snk_reset_ffs). 

This issue has been fixed in v5.2 of the Core, available in ISE 12.1

Revision History 

06/24/2009 - Initial Release

AR# 32920
日期 05/23/2014
状态 Archive
Type 综合文章
的页面