We have detected your current browser version is not the latest one. Xilinx.com uses the latest web technologies to bring you the best online experience possible. Please upgrade to a Xilinx.com supported browser:Chrome, Firefox, Internet Explorer 11, Safari. Thank you!

AR# 3357

M1.4 Map - Incorrect mapping leads to DRC warning about component pin with no signal attached.


The incorrect mapping leads to the following valid DRC warning:

WARNING:x4kdr:82 - Blockcheck: The pin "F2" on comp (mapped physical logic cell) "Rx_BE_COND" is configured to be used but has no signal attached to it.


This problem is corrected in the fourth M1.4 Core Tools patch
available on the Xilinx Download Area:

Solaris: http://www.xilinx.com/txpatches/pub/swhelp/M1.4_alliance/core_sol17_m14.tar.Z
SunOS http://www.xilinx.com/txpatches/pub/swhelp/M1.4_alliance/core_sun17_m14.tar.Z
HPUX: http://www.xilinx.com/txpatches/pub/swhelp/M1.4_alliance/core_hp17_m14.tar.Z
Win95/NT: http://www.xilinx.com/txpatches/pub/swhelp/M1.4_alliance/core_nt17.zip
AR# 3357
日期 04/03/2000
状态 Archive
Type 综合文章