UPGRADE YOUR BROWSER

We have detected your current browser version is not the latest one. Xilinx.com uses the latest web technologies to bring you the best online experience possible. Please upgrade to a Xilinx.com supported browser:Chrome, Firefox, Internet Explorer 11, Safari. Thank you!

AR# 33665

11.3 CORE Generator - Why am I unable to select the -3 speed grade for the PCIe core generation for the Spartan-6 FPGA xc6slx45t part that is on the SP605 board?

描述

Keywords: PCI, express, development, board, evaluation

Can I still use the -3 speed grade for the PCIe core generation for the Spartan-6 FPGA xc6slx45t part that is on the SP605 board?

解决方案

To target the xc6slx45t-3 part, perform the following:

1. Select the -2 speed grade in the CORE Generator software.
2. Open the automatically created xilinx_pcie_1_lane_ep_xc6slx45t-fgg484-2.ucf and change the CONFIG_PART constraint to xc6slx45t-fgg-3

This problem is scheduled to be fixed in the CORE Generator software version 12.1.
AR# 33665
日期 11/05/2009
状态 Active
Type 综合文章
的页面