UPGRADE YOUR BROWSER

We have detected your current browser version is not the latest one. Xilinx.com uses the latest web technologies to bring you the best online experience possible. Please upgrade to a Xilinx.com supported browser:Chrome, Firefox, Internet Explorer 11, Safari. Thank you!

AR# 33704

12.1 EDK - Attempting to connect to XMD results in "ERROR:EDK:970 - Cse lookup device returned irlen of 0..."

描述

When I attempt to connect to XMD, an error similar to the following occurs:

ERROR:EDK:970 - Cse lookup device returned irlen of 0. ID code is 00000000000000000000001111010011 (0x3d3)"

How can I resolve this issue?

解决方案

This error occurs if there is a non-Xilinx device in the chain. Information about non-Xilinx devices need to be included in the idcode.lst located in the following location:

Xilinx\<version>\ISE_DS\data\cse\idcode.lst

Another work-around is to add the information about the devices in the chain by following the procedure in the XPS GUI, as follows:

Debug -> XMD Debug Options -> JTAG Properties -> deselect the Auto-Discover JTAG Chain Definition and Add Device options.

AR# 33704
日期 06/21/2013
状态 Active
Type 综合文章
的页面