UPGRADE YOUR BROWSER

We have detected your current browser version is not the latest one. Xilinx.com uses the latest web technologies to bring you the best online experience possible. Please upgrade to a Xilinx.com supported browser:Chrome, Firefox, Internet Explorer 11, Safari. Thank you!

AR# 33823

11.x ChipScope Pro Analyzer - qvirtex5 - "ERROR:Pack:2811 - Directed packing was unable to obey the user design"

描述

Keywords: LogiCORE, CoreGENERATOR, VIO, ILA, ICON, map, ISE

When I generate a design targeting a QVirtex-5 FPGA part that includes ChipScope analyzer cores generated by Coregen, I see multiple errors at Map. The messages state -

ERROR:Pack:2811 - Directed packing was unable to obey the user design
constraints
(MACRONAME=i_ila/U0/I_NO_D.U_ILA/U_G1.U_CAPCTRL_U_CAP_ADDRGEN_U_WCNT_HCMP_I_S
RL16.U_GAND_SRL16_MSET, RLOC=X0Y0) which requires the combination of the
symbols listed below to be packed into a single SLICEM component.

These are ChipScope analyzer related messages. How do I work around this issue?

解决方案

There are two work-arounds:
1) Use the ChipScope Inserter for ILA and ATC2 cores.
2) Generate cores targeting Virtex-5 FPGA and use the resulting netlist on the qvirtex5 target.

This issue will be resolved in ChipScope Pro Analyzer 12.1
AR# 33823
日期 11/12/2009
状态 Active
Type 综合文章
的页面