AR# 34230

|

11.4 EDK- XPS_SPI What is the clock relationship between SPI and PLB clocks in SPI slave mode?

描述

What is the required clock relationship between SPI and PLB clocks in SPI slave mode?

解决方案


The incoming SPI clock is synchronized with the PLB clock, and so must be frequency-aligned to the PLB clock.

A design with SCK_RATIO = 4 only has 2 PLB clock cycles to sample the SPI clock, and so the SPI clock must also be phase-aligned to the PLB clock.

SCK_RATIO values greater than 4 are not required to be phase-aligned.
AR# 34230
日期 07/07/2014
状态 Active
Type 综合文章
Tools More Less
IP
People Also Viewed