We have detected your current browser version is not the latest one. Xilinx.com uses the latest web technologies to bring you the best online experience possible. Please upgrade to a Xilinx.com supported browser:Chrome, Firefox, Internet Explorer 11, Safari. Thank you!


AR# 34260

Design Assistant for PCI Express - trn_terr_drop_n Asserted when Transmitting a Valid Packet


Why does the signal trn_terr_drop_n assert when transmitting a valid packet?

Note: This Answer Record is a part of the Xilinx Solution Center for PCI Express (Xilinx Answer 34536). The Xilinx Solution Center for PCI Express is available to address all questions related to PCIe.Whether you're starting a new design with PCIe or troubleshooting a problem, use the Solution Center for PCIe to guide you to the right information.


This signal might assert if you have streaming enabled, but then throttle the packet by deasserting trn_tsrc_rdy_n. When streaming is enabled by asserting trn_tstr_n, you must provide the packet without throttling during middle of the packet (from trn_tsof_n to trn_teof_n). If you throttle the packet when trn_tstr_n is enabled, this signal asserts indicating there is an error.

Revision History
07/30/2011 - Initial Release



Answer Number 问答标题 问题版本 已解决问题的版本
34536 面向 PCI Express 的 Xilinx 解决方案中心 N/A N/A
36049 Design Assistant for PCI Express - TRN User Application Interface Questions N/A N/A


Answer Number 问答标题 问题版本 已解决问题的版本
34538 Xilinx Solution Center for PCI Express - Design Assistant N/A N/A
AR# 34260
日期 12/15/2012
状态 Active
Type 综合文章
  • Virtex-6 LXT
  • Virtex-6 CXT
  • Virtex-6 HXT
  • Virtex-6 SXT
  • Virtex-6 FPGA Integrated Block for PCI Express ( PCIe )