AR# 34391

MIG Virtex-6 DDR2/DDR3 - Frequency Support

描述

This section of the MIG Design Assistant focuses on Frequency Support for Virtex-6 DDR3/DDR2 designs. Below, you will find information related to your specific question.

Note: This Answer Record is a part of the Xilinx MIG Solution Center (Xilinx Answer 34243). The Xilinx MIG Solution Center is available to address all questions related to MIG. Whether you are starting a new design with MIG or troubleshooting a problem, use the MIG Solution Center to guide you to the right information.

解决方案

For a complete list of frequency support for Virtex-6 DDR3/DDR2 designs please refer to the"Virtex-6 FPGA Memory Interface Solutions Data Sheet" DS186:

http://www.xilinx.com/support/documentation/ip_documentation/ds186.pdf

In this list you'll find the supported frequency ranges for each speed grade device, and type of supported memory.
For information on usage of Inner Columns for Address/Control Group for MIG Virtex-6 DDR3/DDR2 design, please see:

(Xilinx Answer 34317)- Usage of Inner Columns for Address/Control Group

For information on usage of Inner/Outer Columns for Data Group for MIG Virtex-6 DDR3/DDR2 design, please see:
(Xilinx Answer 34390)- Usage of Inner/Outer Columns for Data Group

链接问答记录

相关答复记录

AR# 34391
日期 12/15/2012
状态 Active
Type 综合文章
器件 More Less
IP