UPGRADE YOUR BROWSER

We have detected your current browser version is not the latest one. Xilinx.com uses the latest web technologies to bring you the best online experience possible. Please upgrade to a Xilinx.com supported browser:Chrome, Firefox, Internet Explorer 11, Safari. Thank you!

AR# 34614

11.4 EDK - ML510 BSB C_PPC440MC_ROW_CONFLICT_MASK and C_PPC440MC_BANK_CONFLICT_MASK are incorrect

描述

For the ML510 BSB theC_PPC440MC_ROW_CONFLICT_MASK and C_PPC440MC_BANK_CONFLICT_MASK are incorrect. This can cause memory tests to fail.

解决方案

The values forthe ML510 DDR2 are as follows:
  • C_DDR_DWIDTH = 64
  • Address Offset = log2(64/8) = 3
  • Column Address Width = 10
  • Row Address Width = 14
  • Bank Address Width = 2
Going through the "Row Conflict and Bank Conflict Mask Settings" on page 13 of the LogiCORE IP DDR2 Memory Controller for PowerPC 440 Processors (v3.00b) Data Sheet -v1.9, April 19, 2010 (DS567):

the MI_BANKCONFLICT_MASK = 32'h01800000 and

the MI_ROWCONFLICT_MASK = 32'h007FFE00 for the ML510 board.

This problem has been fixed in the 12.2 release.

链接问答记录

相关答复记录

Answer Number 问答标题 问题版本 已解决问题的版本
38095 ML510 - Known Issues and Release Notes Master Answer Record N/A N/A
AR# 34614
日期 05/19/2012
状态 Active
Type 已知问题
器件
Tools
IP
Boards & Kits
的页面