AR# 34616

12.1 EDK - The "genace.tcl" file does not include the ML510 board JTAG information

描述

The "genace.tcl" file does not include the ML510 board JTAG information.

解决方案

The "genace.tcl" file is located at: C:\Xilinx\12.1\ISE_DS\EDK\data\xmd\genace.tcl. You can add the following to the "genace.tcl" file (after the Supported Boards Settings comment) to add support for the ML510 board:

# Production ML510
set ml510(jtag_chain_options) "-configdevice devicenr 1 idcode 0x03300093 irlength 14 partname xc5vfx130t"
set ml510(jtag_fpga_position) 1
set ml510(jtag_devices) "xc5vfx130t"

This is scheduled to be fixed in 12.3.

AR# 34616
日期 06/18/2010
状态 Active
Type 综合文章
Tools