We have detected your current browser version is not the latest one. Xilinx.com uses the latest web technologies to bring you the best online experience possible. Please upgrade to a Xilinx.com supported browser:Chrome,
Internet Explorer 11,
Safari. Thank you!
AR# 34657: Virtex-6 FPGA Connectivity Kit TRD - PCI-e only trains to Gen1
Virtex-6 FPGA Connectivity Kit TRD - PCI-e only trains to Gen1
The Virtex-6 FPGA Connectivity Kit TRD fails to configure as PCI-e Gen2 and only trains as Gen1, regardless of the number of times the PC is rebooted.
How can the TRD train as Gen2?
If the PCI-e link does not train to Gen2, you must power cycle the board to re-initialize the link training. This issue is only seen when directly configuring the FPGA and not when configured through the PROM.