UPGRADE YOUR BROWSER

We have detected your current browser version is not the latest one. Xilinx.com uses the latest web technologies to bring you the best online experience possible. Please upgrade to a Xilinx.com supported browser:Chrome, Firefox, Internet Explorer 11, Safari. Thank you!

AR# 34658

XPS_LL_TEMAC and changing PHY TYPE parameter

描述

When Iuse the xps_ll_temac in one mode (MII, GMII, RGMII v1.3, RGMII v2.0, SGMII, or 1000Base-X) and I change to another mode, the top level ports in the MHS are left while the ports in the MHS from the xps_ll_temac are deleted.

解决方案

When you change from one TEMAC_TYPE to another, you need to remove all the associated TEMAC ports from the MHS top level that are not part of the mode being used.

The signals for each C_TEMAC_TYPE (MII, GMII, RGMII v1.3, RGMII v2.0, SGMII, or 1000Base-X) are in the xps_ll_temac data sheet.
$XILINX\EDK\hw\XilinxProcessorIPLib\pcores\xps_ll_temac_v*\doc\

Also, the UCF file needs to be updated with the chosen mode, see (Xilinx Answer 32713).

链接问答记录

主要问答记录

Answer Number 问答标题 问题版本 已解决问题的版本
34609 12.x EDK - 主要问答记录列表 N/A N/A
AR# 34658
日期 12/15/2012
状态 Active
Type 综合文章
Tools
IP
Boards & Kits
的页面