UPGRADE YOUR BROWSER

We have detected your current browser version is not the latest one. Xilinx.com uses the latest web technologies to bring you the best online experience possible. Please upgrade to a Xilinx.com supported browser:Chrome, Firefox, Internet Explorer 11, Safari. Thank you!

AR# 3490

Workview Office: Calc tutorial needs newer commmand (.CMD) files

Description

Keywords: Workview Office, ViewDraw, ViewSim, command, CMD, VCD, calc

Urgency: Standard

General Description:
The Viewlogic tutorial (Calc) that was shipped with M1.3 and M1.4 includes a
command file built for an older version of this tutorial. To perform a
sucessful simulation, this command file needs to be updated.

解决方案

Four new command files are available on the Xilinx FTP site. Two command files
are for the XC4000E versions of the tutorial (CALC_4KE, CALC_BLX, CALC_VL), and
two are for the XC9500 version (CALC_9K). Each family has a functional and a
timing version of the command file.

A ZIP file exists at: http://www.xilinx.com/txpatches/pub/swhelp/viewlogic/vtut_cmd.zip
AR# 3490
创建日期 02/19/1998
Last Updated 03/27/2000
状态 Archive
Type 综合文章