2. 技术支持
  3. AR# 3527: M1.4 Map - FATAL_ERROR:basnc:basncsignal.c:262:1.62 - Could not find a bel for a signal...

AR# 3527

|

M1.4 Map - FATAL_ERROR:basnc:basncsignal.c:262:1.62 - Could not find a bel for a signal...

描述

FATAL_ERROR:basnc:basncsignal.c:262:1.62 - Could not find a
bel for a signal on pin Y of comp b3_u1_b3_source_select<1>. Its current programmed state is :
CLKX:CLK ECX:EC CLKY:CLK DY:G XMUX:F F4MUX:F4I XQMUX:QX
YQMUX:QY ECY:EC DX:H H1:C1 DIN:C1 SR:C3 EC:C4 H:#LUT:H=H1 RAMCLK:CLK G:#LUT:G=G1 F:#RAM: SRX:RESET FFX:#FF SRY:RESET FFY:#FF

This error is an indication of a mapping error where a
component has been created by the mapper that has an
inconsistancy between the component's configuration and
the external connectivity. In this case the Y pin of a
CLB is involved.

解决方案

A fix for this error is included in the current M1.4 Core
Applications patch available from the Xilinx Download Area:

Solaris: http://www.xilinx.com/txpatches/pub/swhelp/M1.4_alliance/core_sol17_m14.tar.Z
SunOS http://www.xilinx.com/txpatches/pub/swhelp/M1.4_alliance/core_sun17_m14.tar.Z
HPUX: http://www.xilinx.com/txpatches/pub/swhelp/M1.4_alliance/core_hp17_m14.tar.Z
Win95/NT: http://www.xilinx.com/txpatches/pub/swhelp/M1.4_alliance/core_nt17.zip

AR# 3527
日期 04/19/2000
状态 Archive
Type 综合文章
People Also Viewed