AR# 35579

|

12.1/11.5 ChipScope Pro - ATC2 Core - FATAL_ERROR:Pack:pks3eiobregrules.c:973:1.16 - The dual data rate register symbol...

描述

When I add an ATC2 core to my design with "State" mode enabled I see a fatal error in Map.

FATAL_ERROR:Pack:pks3eiobregrules.c:973:1.16 - The dual data rate register symbol
"test3_timing/U0/I_SMODEC.U_ATC/u_atp_iob/i_state.i_tdm1x.U_CLK_ODDR/i_s3.u_o
ddr/test3_timing/U0/I_SMODEC.U_ATC/u_atp_iob/i_state.i_tdm1x.U_CLK_ODDR/i_s3.
u_oddr/ODDR2.C0D1" has no input signal. Process will terminate. For
technical support on this issue, please open a WebCase with this project
attached at http://www.xilinx.com/support.

How do I work around this issue?

解决方案

To work around this issue, you must use "Timing" mode when generating the core.

链接问答记录

主要问答记录

Answer Number 问答标题 问题版本 已解决问题的版本
35269 12.x ChipScope Pro - Known Issues for the ChipScope Pro 12.x software N/A N/A
AR# 35579
日期 01/02/2013
状态 Active
Type 综合文章
器件
Tools
People Also Viewed