2. 技术支持
  3. AR# 3578: Install - Invoking an ISE GUI produces "Wind/U error 192: X-Resource: DefaultGUIFontSpec ( ) does not fully specify..."

AR# 3578

Install - Invoking an ISE GUI produces "Wind/U error 192: X-Resource: DefaultGUIFontSpec ( ) does not fully specify..."

描述


When I invoke an ISE GUI on a UNIX machine, I receive the following error message:

Wind/U Error (192): X-Resource: DefaultGUIFontSpec (font) does not fully specify a font set for this locale.

What is the cause of this error, and how can I work around it?

解决方案

This message can occur when a font specification has not been defined properly or a windows emulator such as eXceed or Reflection X has been used.

Xilinx does not currently support these products, but does support VNC.

To work around this issue, follow the steps below:

1. Discontinue use of the Windows emulator.
2. Kill and restart the emulator session.
3. Set the LOCALE environment variable to C.

1. Run /usr/X11R6/bin/xlsfonts to see what fonts are installed.

2. Create a txt file with a font from xlsfont similar to the following:
 

*SystemFontSpec:-adobe-utopia-bold-i-normal--0-0-0-0-p-0-adobe-standard
*SystemFont:-adobe-utopia-bold-i-normal--0-0-0-0-p-0-adobe-standard


3. Run the following command:
xrdb -merge font.txt

It has been reported that the following command also seems to eliminate the problem: 
xrdb -remove

However, this has not been tested, and Xilinx cannot guarantee that this will not will cause any problems to other software products.

If using NX Client:

1. Download the client side font packages from No-machine (75dpi family first).
2. Remove the .nx directory.
3. Restart NX to machine.

附件

文件名 文件大小 File Type
VC707revb_Axi_Ethernet.zip 7 MB ZIP
AR# 3578
日期 01/16/2015
状态 Active
Type 综合文章
Tools