We have detected your current browser version is not the latest one. Xilinx.com uses the latest web technologies to bring you the best online experience possible. Please upgrade to a Xilinx.com supported browser:Chrome, Firefox, Internet Explorer 11, Safari. Thank you!

AR# 3585

M1 PAR: Is there a way to prevent route-thrus?


Keywords: par, route-thru, route-through,

Urgency: standard

General Description:
Is there a way to prevent route-thrus?

There is no command line option to prevent PAR from generating
route-thrus. However there are a couple of things you can
try, depending on the situation.



Map the logic explicitly using FMAPs, HMAPs, and location

If all combinational logic and I/O are explicitly constrained, there is less potential for generating route-thrus.

If you can pinpoint the logic associated with the route-thru,
you may be able to do this on a more limited subset of the


If you observe *bonded* IOBs being used as route-thrus, this
would be a bug in the software.

For XC3000 or XC5200 designs, there is a PAR patch that
corrects the problem.
AR# 3585
日期 10/21/2008
状态 Archive
Type 综合文章