AR# 36193

ChipScope & Vivado Logic Debug - How can I trigger two ILA cores at the same time?

描述

I need to use two ILAs in my project to trigger with different clocks or instantiate in two modules.

How can I trigger two ILAs at the same time?

解决方案

To do this you will need to have a controllable external trigger (for example hitting the reset pushbutton on the board first) or a predictable trigger.

Follow the steps below:

  1. Make sure the trigger condition does not occur first.
  2. Hit the "Run Trigger" button in ChipScope analyzer or the Vivado Hardware Manager for both ILA.
  3. Make the trigger condition happen.

When the capture buffers are full, the waveform for both ILAs will be uploaded and shown on the screen.

链接问答记录

相关答复记录

Answer Number 问答标题 问题版本 已解决问题的版本
46790 Spartan-6 FPGA Design Assistant - Troubleshooting Common Clocking Problems N/A N/A
AR# 36193
日期 12/01/2014
状态 Active
Type 综合文章
Tools