AR# 36389

|

Virtex6- Reset requirement on MMCM

描述

What are the requirements on reset for MMCM?

解决方案

The RST signal is an asynchronous reset for the MMCM. The MMCM will synchronously re-enable itself when this signal is released.

The MMCM automatically locks after power on; no extra reset is required.

From the Virtex-6 Data Sheet the minimum reset pulse (RSTMINPULSE) = 1.5 ns.
AR# 36389
日期 07/19/2010
状态 Active
Type 综合文章
器件 More Less
People Also Viewed