We have detected your current browser version is not the latest one. Xilinx.com uses the latest web technologies to bring you the best online experience possible. Please upgrade to a Xilinx.com supported browser:Chrome, Firefox, Internet Explorer 11, Safari. Thank you!

AR# 3720

M1.3/M1.4 CPLD Hitop - Hitop hangs for 9500 design


Keywork: hitop, hang

Urgency: standard

General Description:
When implementing the design through it hangs during the following command:
hitop -f ../xc9500.ngd -d design -s -l design.log -o design



For M1.3 -
There is no resolution other than upgrading to M1.4

For M1.4 -
Turn on the switch for Multi-Level Logic Optimization in the Implementation Option Template (this is usually on by default)

NOTE: This is fixed in M1.5, where you don't need to turn on MULTI_LEVEL_LOGIC_OPT to get hitop to complete, but you will still need it to get it to fit.
AR# 3720
日期 03/29/2000
状态 Archive
Type 综合文章