UPGRADE YOUR BROWSER

We have detected your current browser version is not the latest one. Xilinx.com uses the latest web technologies to bring you the best online experience possible. Please upgrade to a Xilinx.com supported browser:Chrome, Firefox, Internet Explorer 11, Safari. Thank you!
  1. Xilinx -灵活应变. 万物智能.
  2. 技术支持
  3. AR# 3754: V1.5, V1.4 CORE Generator - Xilinx M1.4 and Viewlogic must be installed first for Viewlogic users, and Foundation must be installed for Foundation users

AR# 3754

V1.5, V1.4 CORE Generator - Xilinx M1.4 and Viewlogic must be installed first for Viewlogic users, and Foundation must be installed for Foundation users

描述

Keywords: CORE Generator, COREGen, install, Viewlogic, Foundation, WorkView office,
workview

Urgency: Hot

General Description:
Installation requirements for CORE Generator for Viewlogic and Foundation customers.

解决方案

For Viewlogic and Foundation users, the following
software must be installed first before
installing the CORE Generator:


Viewlogic Users (Workview Office, Powerview) :
---------------------------------------------

- Xilinx M1 (for NGDBUILD and NGD2EDIF, used
for functional simulation netlist
generation)
- Viewlogic (Powerview or Workview Office are
required to supply VHDL2SYM for
symbol generation, and EDIFNETI for
functional simulation netlist
generation)

Foundation Users :
------------------

- Foundation (to supply NET2SYM symbol generator)


Please refer to (Xilinx Solution #3884) for information
on the required versions of Foundation and Viewlogic for
V1.4 and V1.5 of the CORE Generator.
AR# 3754
日期 02/21/2001
状态 Archive
Type 综合文章
的页面