UPGRADE YOUR BROWSER

We have detected your current browser version is not the latest one. Xilinx.com uses the latest web technologies to bring you the best online experience possible. Please upgrade to a Xilinx.com supported browser:Chrome, Firefox, Internet Explorer 11, Safari. Thank you!

AR# 377

5.0 XDM - only allows you to set APR seed value of 0-99

Description

When the APR program is executed, it uses a random seed to determine the
initial placement, so that different results can be produced from place
and route. It is possible to set the seed number to a fixed value so
that results for a given place and route run on a specific design can
be repeated. While the seed number can be anywhere from 0 to 32767,
XDM 5.0 will only allow a number from 0 to 99.

解决方案



There is really no advantage to using one seed number over another, so picking a number less than 99 is no less advantageous than picking one less than 32767. If for some reason you need to use a specific seed larger than 99, you
must run apr from the command line.

AR# 377
创建日期 08/31/2007
Last Updated 03/22/2000
状态 Archive
Type ??????