We have detected your current browser version is not the latest one. Xilinx.com uses the latest web technologies to bring you the best online experience possible. Please upgrade to a Xilinx.com supported browser:Chrome, Firefox, Internet Explorer 11, Safari. Thank you!

AR# 38357

12.2 EDK, MPMC v6.01.a - Incorrect DDR2 ODT setting for Spartan-6 FPGA


For the DDR2 SDRAM "ODT Setting" in the configuration window of mpmc or "C_MEM_ODT_TYPE" in MHS, I can select from "Disabled", 75Ohm, 150Ohm, 50Ohm.
In testing, the ODT setting is implemented incorrectly; the 75Ohm and 150Ohm settings are switched.
How do I resolve this issue?


This issue is caused by an incorrect mapping in verilog module "s6_phy_top.v":
localparam P_MEM_DDR2_RTT = (C_MEM_ODT_TYPE == 0) ? "OFF" :
(C_MEM_ODT_TYPE == 1) ? "150OHMS" :
(C_MEM_ODT_TYPE == 2) ? "75OHMS" :

Which should be set as:
localparam P_MEM_DDR2_RTT = (C_MEM_ODT_TYPE == 0) ? "OFF" :
(C_MEM_ODT_TYPE == 1) ? "75OHMS" :
(C_MEM_ODT_TYPE == 2) ? "150OHMS" :

To work around this issue, set 75Ohm for 150Ohm and 150Ohm for 75Ohm as the desired setting.
This issue is scheduled to be fixed in EDK 13.1 and later.
AR# 38357
日期 12/15/2012
状态 Active
Type 综合文章
  • Spartan-6 LX
  • Spartan-6 LXT
  • EDK - 12.2
  • EDK - 12.3
  • EDK - 12.1
  • Multi-Port Memory Controller (MPMC)