UPGRADE YOUR BROWSER

We have detected your current browser version is not the latest one. Xilinx.com uses the latest web technologies to bring you the best online experience possible. Please upgrade to a Xilinx.com supported browser:Chrome, Firefox, Internet Explorer 11, Safari. Thank you!

AR# 38487

Project Navigator - Can I create a message filter in command lines?

Description

I would like to filter some messages when using a command line flow.

How can this bedone?

解决方案

With a strict command line flow, the message filtering in Project Navigator is not available.

It is possible to filter messages using ISE Tcl commands. First, you need to setup the filters in Project Navigator as follows:

  1. Open the ISE project with Project Navigator.
  2. Create the Message Filter.
  3. Generate the Tcl script from Project -> Generate Tcl script.
  4. Close Project Navigator.
  5. Run the flow using individual commands or a script in the Xilinx Tcl shell (xtclsh).

The filter is stored in the iseconfig folder (in the work directory) in a file called "filter.filter".

链接问答记录

相关答复记录

Answer Number 问答标题 问题版本 已解决问题的版本
19789 XST - How do I filter messages out of the XST log file? N/A N/A
AR# 38487
创建日期 03/01/2011
Last Updated 01/29/2013
状态 Active
Type 综合文章
Tools
  • ISE Design Suite - 12.3