UPGRADE YOUR BROWSER

We have detected your current browser version is not the latest one. Xilinx.com uses the latest web technologies to bring you the best online experience possible. Please upgrade to a Xilinx.com supported browser:Chrome, Firefox, Internet Explorer 11, Safari. Thank you!

AR# 38572

ML405 - Are the jumpers J15 and J23 on RevB ML405 boards?

Description

Jumpers J15 and J23 are listed in the Evaluation Platform User Guide for the ML 405, UG210; however,they are not found in theschematics.

Are these jumpers located on RevB ML405 boards?

解决方案

The jumpers J15, J23, and J16 are used on RevB ML405 boards to set the VCCO for bank 7 (either to 2.5 V or 3.3 V). These jumpers are currently not shown in the schematic, but their use and settings are listed in UG210, the ML405 Evaluation Platform User Guide.

链接问答记录

主要问答记录

Answer Number 问答标题 问题版本 已解决问题的版本
37874 ML40x - Known Issues and Release Notes Master Answer Record N/A N/A

相关答复记录

Answer Number 问答标题 问题版本 已解决问题的版本
37874 ML40x - Known Issues and Release Notes Master Answer Record N/A N/A
AR# 38572
创建日期 10/19/2010
Last Updated 12/15/2012
状态 Active
Type 综合文章
器件
  • Virtex-4 FX
Boards & Kits
  • ML405