We have detected your current browser version is not the latest one. Xilinx.com uses the latest web technologies to bring you the best online experience possible. Please upgrade to a Xilinx.com supported browser:Chrome, Firefox, Internet Explorer 11, Safari. Thank you!

AR# 38598

PlanAhead 12.3 - Input buffer overflow, cannot enlarge buffer because scanner uses Reject


When I try to open the netlist design of my project that was created with an EDIF, the PlanAhead tool crashes and the resultant terminal contains the following error:

"Input buffer overflow, can't enlarge buffer because scanner uses Reject"

Why am I doing wrong?


This is a bug with the PlanAhead software that is fixed in PlanAhead tool 12.4. The issue occurs when the EDIF defines a property with a very long string value. The property with the very long string value is normally an unused property and therefore can be manually removed from the netlist.
AR# 38598
日期 05/19/2012
状态 Archive
Type 已知问题
  • PlanAhead - 12.3
  • PlanAhead - 12.2
  • PlanAhead - 12.1