AR# 38651

MIG 3.6 Spartan-6 - DDR termination recommendation

描述

DDR memories do not support on-die termination (ODT), therefore, external memory terminations have to be provided. Spartan-6 FPGAs provide optional calibrated or uncalibrated input termination.MIG allows you to select calibrated or uncalibrated termination on the Spartan-6 FPGA, but selecting these options results in a non-working design.Therefore, you should only select "External Input Termination" in the "FPGA Options" page in MIG.

解决方案

There is no on-die termination supportfor DDR memories, therefore, external terminations have to be provided.Theexternal memory terminations should be placed after the associated memory component in a fly-by fashion.
For more information onPCB layout considerations seethe"Spartan-6 FPGA Memory Controller" User Guide (UG388):
http://www.xilinx.com/support/documentation/user_guides/ug388.pdf
Because the external termination is required for DDR, you should not select any internal termination in the Spartan-6FPGA.For DDR interfaces,you should select"External Input Termination" in the "FPGA Options" page in MIG 3.6.Upcoming versions of MIG will have the option to select calibrated or uncalibrated input termination for DDR interfaces disabled.

本答复记录是否对您有帮助？

链接问答记录

相关答复记录

Answer Number	问答标题	问题版本	已解决问题的版本
40778	MIG Spartan-6 MCB - Termination and I/O Standard Guidelines	N/A	N/A
39128	MIG Virtex-6 and Spartan-6 v3.7 - Release Notes and Known Issues for ISE Design Suite 13.1	N/A	N/A
38951	MIG v3.61 - Release Notes and Known Issues for ISE Design Suite 12.4-14.2	N/A	N/A

AR# 38651
日期	03/04/2013
状态	Active
Type	综合文章
器件	Spartan-6 LX Spartan-6 LXT
IP	MIG

的页面

开发者资源

AR# 38651

MIG 3.6 Spartan-6 - DDR termination recommendation

描述

解决方案

链接问答记录

相关答复记录