UPGRADE YOUR BROWSER

We have detected your current browser version is not the latest one. Xilinx.com uses the latest web technologies to bring you the best online experience possible. Please upgrade to a Xilinx.com supported browser:Chrome, Firefox, Internet Explorer 11, Safari. Thank you!

AR# 40076

12.1 EDK - Can an EDK BRAM block be configured with different port width on 2 ports?

描述

Can an EDK BRAM block be configured with different port widths on 2 ports?

解决方案

No, only 32-bit port width is supported.

To do this, you would need to use Core Generator to create the BRAM block and then make it a custom IP to work with the EDK system.

You might also need to edit the BMM file if the software application needs to be stored in this BRAM block inside the custom IP.

AR# 40076
日期 09/12/2014
状态 Active
Type 综合文章
Tools
  • EDK - 11.1
  • EDK - 11.2
  • EDK - 11.3
  • More
  • EDK - 11.4
  • EDK - 11.5
  • EDK - 12.1
  • EDK - 12.2
  • EDK - 12.3
  • EDK - 12.4
  • EDK - 13
  • EDK - 13.1
  • Less
IP
  • Block Memory Generator
的页面