UPGRADE YOUR BROWSER

We have detected your current browser version is not the latest one. Xilinx.com uses the latest web technologies to bring you the best online experience possible. Please upgrade to a Xilinx.com supported browser:Chrome, Firefox, Internet Explorer 11, Safari. Thank you!

AR# 40206

13.1 EDK, AXI_FIFO_MM_S - "ERROR:PhysDesignRules - Issue with pin connections and/or configuration on block RAMB18E1_RAMB18E1"

描述

When I use theAXI_FIFO_MM_S core in EDK 13.1 in a 7-Series device, the following error occurs:

"ERROR:PhysDesignRules - Issue with pin connections and/or configuration on block:<COMP_IPIC2AXI_S/COMP_RX_FIFO/COMP_BRAM/RAMB16>:<RAMB18E1_RAMB18E1>. For SDP mode, WRITE_WIDTH_A should be set to the maximum value of 18 to achieve proper block operation"

How do I resolve it?

解决方案

This issue is planned to be fixed in EDK 13.2.
AR# 40206
日期 05/19/2012
状态 Active
Type 错误信息
器件
  • Artix-7
  • Kintex-7
  • Virtex-7
  • Virtex-7 HT
Tools
  • EDK - 13.1
IP
  • AXI Streaming FIFO
的页面