UPGRADE YOUR BROWSER

We have detected your current browser version is not the latest one. Xilinx.com uses the latest web technologies to bring you the best online experience possible. Please upgrade to a Xilinx.com supported browser:Chrome, Firefox, Internet Explorer 11, Safari. Thank you!

AR# 40226

Logicore CPRI v 3.x - Why do I see a status code 'F' and then after TX Strobe is applied I see status code 'B'?

描述

Logicore CPRI v 3.x - Why do I see a status code 'F' and then after TX Strobe is applied I see status code 'B'?

解决方案

When the core enters L1 synchronization the preferred Ethernet and HDLC rates are not reloaded by the picoblaze. This can cause the link to come up in the passive "B" state after the TX strobe is asserted. This issue will be resolved in the next version of the IP.

For Release Notes and Known Issues for 12.2 for the LogiCORE CPRI v3.2, please see (Xilinx Answer 36969).
AR# 40226
日期 12/15/2012
状态 Archive
Type 综合文章
IP
  • CPRI
的页面