\coregen.cgc'"">

UPGRADE YOUR BROWSER

We have detected your current browser version is not the latest one. Xilinx.com uses the latest web technologies to bring you the best online experience possible. Please upgrade to a Xilinx.com supported browser:Chrome, Firefox, Internet Explorer 11, Safari. Thank you!

AR# 40476

13.1 CORE Generator - "ERROR:coreutil:646 - Unable to create design from file \coregen.cgc'"

描述

When I attempt to open a CORE Generator project the following errors occur:

"Closed project file.
Opening project file C:/my_proj/coregen.cgp.
ERROR:coreutil:646 - Unable to create design from file 'C:\my_proj\coregen.cgc'
ERROR:sim:717 - Unable to open project 'C:\my_proj\coregen.cgc'
ERROR:encore:268 - Project C:\my_proj\coregen.cgc could not be opened
Could not open project file C:/my_proj/coregen.cgp."

The project cannot be opened in theCORE Generator standalone tool or through the Project Navigator -> Manage Cores option.

解决方案

This problem occurs if the project directory where the "coregen.cgp" fileis located contains a PLL or DCM_SP Clocking Wizard core (.xaw).

To open the CORE Generator toolproject, temporarily remove the core ".xaw"file, orchange the file extension ofthe ".xaw" file in the project directory.

The XAWcannot cannot be opened in 13.1 through the CORE Generator tool.However, ifyou needto edit the XAW core, you can use the Architecture Wizard standalone; run "c:\Xilinx\ISE_DS13.1\ISE\bin\nt\arwz.exe my_pll.xaw".

Even though theCORE Generator tool cannot open the ".xaw" file, the generated Verilog or VHDL file is valid and can be used by Project Navigator and XST.

This issue has been fixed in software version 13.2.

链接问答记录

相关答复记录

AR# 40476
日期 05/19/2012
状态 Archive
Type 已知问题
Tools
  • ISE Design Suite - 13.1
的页面