AR# 40506


LogiCORE IP RXAUI v2.1 - Xs are seen in Marvel RXAUI 7-Series timing simulation


When the Marvel RXAUI core is targeting Virtex-7 or Kintex-7 devices, Xs are seen in timing simulation.The problem is that the RXOUTCLK from the GTXE2_CHANNEL transitions from 0->X at the start of simulation.


To resolve this issue, you have to manually force the RXOUTCLK signal to 0 (through a simulator-specific command) for timing simulation to work. Otherwise the Xs will propagate through the simulation, resulting in the simulation failing to complete successfully.

Thisissue isscheduled to be fixed in the GTXE2_CHANNEL simulation model in the ISE 13.2 software.



Answer Number 问答标题 问题版本 已解决问题的版本
40630 LogiCORE IP RXAUI v2.1 - Release Notes and Known Issues for the 13.1 ISE Software N/A N/A
AR# 40506
日期 12/15/2012
状态 Active
Type 综合文章
People Also Viewed