UPGRADE YOUR BROWSER

We have detected your current browser version is not the latest one. Xilinx.com uses the latest web technologies to bring you the best online experience possible. Please upgrade to a Xilinx.com supported browser:Chrome, Firefox, Internet Explorer 11, Safari. Thank you!

AR# 40610

12.x/13.x/14.x iMPACT - Verify with Indirect Programming of my BPI Flash Fails when User Data is Present

描述

When I do a verify with Indirect programming of my BPI flash, itfails when user data is present. I add the user data as an ELF file in the PROMGen softwareor with the iMPACT software.

Is my flash programmed correctly?

解决方案

This is an issue with the verify operation and not programming. If the configuration data and user data are not concurrent, you can see this problem.

To check that the Flash is programmed correctly:

1.Boot up your system and verify if the data is correct with a system check.
2. Read back the flash and use a text editor to compare the data programmed to the data read back. Be aware that theentire flash is read back, so you might need to align the data.

This issue will be resolved in a future version of the iMPACT software.

链接问答记录

主要问答记录

Answer Number 问答标题 问题版本 已解决问题的版本
47890 14.x iMPACT - Known Issues for the iMPACT 14.x tools N/A N/A
AR# 40610
日期 12/15/2012
状态 Active
Type 综合文章
器件
  • Virtex-5 FXT
  • Virtex-5 LX
  • Virtex-5 LXT
  • More
  • Virtex-5 SXT
  • Virtex-5 TXT
  • Less
Tools
  • ISE Design Suite - 12.4
  • ISE Design Suite - 12.1
  • ISE Design Suite - 12.2
  • More
  • ISE Design Suite - 12.3
  • ISE Design Suite - 13.1
  • ISE Design Suite - 13.2
  • ISE Design Suite - 13.3
  • ISE Design Suite - 13.4
  • ISE Design Suite - 14.1
  • Less
的页面