UPGRADE YOUR BROWSER

We have detected your current browser version is not the latest one. Xilinx.com uses the latest web technologies to bring you the best online experience possible. Please upgrade to a Xilinx.com supported browser:Chrome, Firefox, Internet Explorer 11, Safari. Thank you!

AR# 40653

12.2 EDK, MPMC - Reduced drive output enable C_MEM_REDUCED_DRV not set correctly

描述

When I set the MPMC parameter C_MEM_REDUCED_DRV to "1" in Virtex-6 FPGA, MPMC sets DDR3 mode register MR1[5,1] to "00". In Spartan-6 FPGA, the opposite setting is set. Which is correct?

According to the MPMC data sheet, the description of C_MEM_REDUCED_DRV for DDR3 is as follows:

0 = RZQ/6
1 = RZQ/7
2 = Reserved
3 = Reserved

解决方案

In Virtex-6 FPGA, setting C_MEM_REDUCED_DRV = 1 will correctly produce a reduced drive setting of RZQ/6. However, the data sheet and MPMC GUI labels are incorrect. It will be fixed to:

0 = RZQ/7
1 = RZQ/6
2 = Reserved
3 = Reserved

In Spartan-6 FPGA MPMC, the behavior of C_MEM_REDUCED_DRV is inverted from its normal meaning. To work around, invert the parameter until this issue is fixed. These issues are scheduled to be fixed in EDK 13.2.

AR# 40653
日期 12/15/2012
状态 Active
Type 综合文章
器件
  • Virtex-6 LX
  • Virtex-6 LXT
Tools
  • EDK - 11.2
  • EDK - 11.3
  • EDK - 11.4
  • More
  • EDK - 11.5
  • EDK - 12.1
  • EDK - 12.2
  • EDK - 12.3
  • EDK - 12.4
  • EDK - 13
  • EDK - 13.1
  • Less
IP
  • Multi-Port Memory Controller (MPMC)
的页面