We have detected your current browser version is not the latest one. Xilinx.com uses the latest web technologies to bring you the best online experience possible. Please upgrade to a Xilinx.com supported browser:Chrome, Firefox, Internet Explorer 11, Safari. Thank you!

AR# 4117

Mentor, pld_edif2tim - "Error line 2 illegal identifier "15 encountered from synthesis"


When reading the "time_sim.edn" file from "pld_edif2tim" in Mentor, the following error appears:

"Error line 2 illegal identifier "15 encountered from synthesis"

This happens if you are running M1 from PC and porting the "time_sim.edn" to workstation.


If the "time_sim.edn" file is viewed in an editor on the Unix workstation the file will still appear in DOS format with the ^M at the end of the lines, even though from the Mentor editor the file will appear normal (without the ^M).

1. Run dos2unix on the Unix workstation:

dos2unix time_sim.edn > time_sim_new.edn

2. Re-run pld_edif2tim on the new "time_sim_new.edn" file.

AR# 4117
日期 12/15/2012
状态 Archive
Type 综合文章