UPGRADE YOUR BROWSER

We have detected your current browser version is not the latest one. Xilinx.com uses the latest web technologies to bring you the best online experience possible. Please upgrade to a Xilinx.com supported browser:Chrome, Firefox, Internet Explorer 11, Safari. Thank you!

AR# 4187

4.2i Foundation Schematic Editor - Error: "Cannot read sheet for macro:DAT-TRAN/LMACS: The chunk offset is too big"

Description

Keywords: chunk, LMACS, offset, Schematic Editor, Foundation

Urgency: Standard

General Description:
When I try to push into a design's hierarchy, Schematic Editor reports the following error:

"Cannot read sheet for macro:DAT_TRAN"

Additionally, Project Manager reports the following error:

"LMACS: The chunk offset is too big."

解决方案

To resolve this error:

1. In Schematic Capture, select File -> Open. Open the schematic macro in question.
2. Save the schematic macro using a different name (e.g., "new.sch").
3. Open the schematic sheet containing the macro symbol.
4. Double-click on the symbol. Add the following in the Parameters field:

Name: $file
Description: new.sch

Click on "Add", and then click "OK".

5. You will now be able to push into the macro.
AR# 4187
创建日期 07/02/1998
Last Updated 08/12/2003
状态 Archive
Type 综合文章