UPGRADE YOUR BROWSER

We have detected your current browser version is not the latest one. Xilinx.com uses the latest web technologies to bring you the best online experience possible. Please upgrade to a Xilinx.com supported browser:Chrome, Firefox, Internet Explorer 11, Safari. Thank you!

AR# 4214

M1.5: TRCE: Internal constant used to represent NODELAY conflicts with negative delays.

Description

General Description: An internal constant used in the representation of delay values

conflicts with real negative delay values, causing TRCE to ignore real delay values.

In particular, negative hold times of -0.001ns will not be reported (and race

checking will not be performed on these delays).

In virtex it is possible of getting -1ps hold times causing the tools to

ignoring them. Because the tools thought these were invalid delays,

no hold checking was performed when this occured.

解决方案

Currently there is no resolution to this issue.

This is fixed in the next release of the software, version 2.1i

AR# 4214
创建日期 08/31/2007
Last Updated 01/18/2010
状态 Archive
Type 综合文章