We have detected your current browser version is not the latest one. Xilinx.com uses the latest web technologies to bring you the best online experience possible. Please upgrade to a Xilinx.com supported browser:Chrome, Firefox, Internet Explorer 11, Safari. Thank you!

AR# 4312

A1.4/F1.4 Lca2ncd - Re-entrant par of lca2ncd'd design leave partially configured route-thrus behind.


Cases have been seen where re-entrant routing of .ncd's created
by lca2ncd results in DRC errors. PAR will rip-up and re-route a
net that had a route-thru, find an alternate path, but leave the
CLB route-thru partially configured. The problem was found to be
a problem with the lca2ncd conversion and a patch is now available.


This problem is fixed in the latest M1.4 Core Tools Update
available on the Xilinx Download Area:

Solaris: http://www.xilinx.com/txpatches/pub/swhelp/M1.4_alliance/core_sol17_m14.tar.Z
SunOS http://www.xilinx.com/txpatches/pub/swhelp/M1.4_alliance/core_sun17_m14.tar.Z
HPUX: http://www.xilinx.com/txpatches/pub/swhelp/M1.4_alliance/core_hp17_m14.tar.Z
Win95/NT: http://www.xilinx.com/txpatches/pub/swhelp/M1.4_alliance/core_nt17.zip
AR# 4312
日期 04/19/2000
状态 Archive
Type 综合文章